MBC - manual boost controller PROPERFEKT

This device makes it possible to manually change and set boost pressure – increase the engine power of your vehicle !!! !!!! Brand new model !!!!-Ceramic ball of bigger diameter increases the device’s reliability, - 2 springs (increased range of regulation). Operation: Set the desired boost pressure (e.g. 0.5bar). Until there is such a pressure in the system (on the intake side), the valve will be tightly closed. After exceeding the set pressure threshold, the valve will open. Such a mode of operation results in an immediate boost. The vehicle’s speed increases, as the driver has the full boost at his or her disposal from the very beginning – even with slightly closed throttle valve. While taking advantage of the MBC, it is also recommended to install a boost gauge to check the settings after each modification. The pressure type valves are connected along the pressure flow line and attached to the WG. The valve also incorporates he vent channel.