BMW E46 Extreme exhaust manifold k64spec T3 T4 single-spool

RHD + LHD CARS

AC +!!!! AIR CONDITIONING COMPRESSOR IN PLACE!

ROOM FOR DOWNPIPE, even in RHD cars (*for .rhd preferes 2,75")

M52 M54 T3 T4

Compact manifold for high-power k64spec for BMW TURBO engines.

15mm FLANGES

- Best flow rates - documented by projects over 600+ (fast spool, high flow at the top)

- No problems with exhaust gas blockage like with simple manifolds!

- Backpressure - kept to a minimum, meaning low EGT, no knocking, etc.

- Surfaces are milled.

- with a 48mm wastegate pipe outlet / fits 40mm-60mm

- for any flange: T3 / T4 /

- 100% custom product

- for any compressor:

We have patterns for the GT28, GT30, GT3530, GT3582R, Holset, Holset HX35...

(The customer must adjust and weld the flanges of their wastegate valve in the appropriate position according to their preference due to the many options!)

The manifold is one of the most important components, forming the backbone of POWER.

The success of a turbocharged BMW depends on the right turbo and a good exhaust manifold.

Our manifold design is 100% perfect, with the hood closed, without interference with the intake manifold or keypad.

The manifold is in the OEM position, does not interfere with the apron or hood (it closes).

We recommend strengthening the engine -> an additional turbo mount -> to reduce vibration.

With this manifold, we can achieve over 1000 HP and the most powerful E46 in Poland!