BMW TURBO KIT STAGE1 k64spec M50 M52 E30 E34 E36

FOR M50, M50vanos, M52 (singlevanos) ENGINES

STAGE1 - SOFT BOOST (without opening the engine)

This kit is filled with well-known OEM-quality brands, such as Bosch, NGK, LUK, Sachs...

To keep it simple and easy to follow, we've split the contents of the kit into different 

sections. If you want any parts of the kit separately - message us. 

We can supply each part individually.

Hundreds of these turbo kits are in use around the world. 

We stand by what we sell and this is the only kit on the market with engine reliability

 modifications strong enough for the power the kit quotes.

In the set you can choose a few options, such as a more powerful clutch or ecu. 

Please choose if the exhaust manifold is for RHD or LHD.

The stage1 kit can be upgraded to ver stage2 at a later time. Everything stays :)

Safe powers up to around 300KM +

We present the SOFT option for M50 + M50 vanos + M52 engines (singlevanos)

boost around 0.5 bar, without having to relax the engine.

That is 100% engine series turbo kit- without interference in the head and the clutch (the NEW stock clutch lifts to around 400NM)

A small top-up of 0.5 bar is also

very safe values ​​for the serial compression ratio.

Our turbo kits have been tested on M50 M52 engines

The recharge was at the level of 0.55 bar (engine not relaxed, serial clutch).

The power to generate at this level is around 310KM and 400nM (tester is: m52b25)

All turbo equipment is ready for greater recharging and power!

If we provide an adequate degree of compression (relief), we make from such a set

over 400KM (see stage2 on our store) and the set consists of parts that exceed the capacity of even 500KM!

The set is 100% selected according to the checked setup,

safety and max power at low charge.

The set includes work instructions, together with photos, a start map to the computer,

and additionally advice and telephone support 24 / h;) For final tuning, we invite you to us.

LIST PARTS:

6 x NGKsport spark plugs with properly adjusted spark gap

Turbocharger k64spec Journal 360* 

44mm external WASTEGATE TIAL !!! ORGINAL !! - big and highquality VALVE - Ready for boost: 0,5-2bar !

BlowOff valve 

Manual Boost Controller MBC Properfekt

AFR Stainless steel M18x1 boss/nut for wideband oxygen sensor

Stainless FLANGE FOR Exhaust 10mm / Turbo 

Stainless Gaskets Turbo exhaust / 

Oil system turbo 1,5m + gauge adapter

HighFlow stainlessstell EXHAUST MANIFOLD k64spec ! RHD or LHD version ! flow 700+ !

6 x siemens deka 630cc INJECTORS (ORGINAL) 700HP FLOW !

*options: NON ECU or ECU piggyback ECUMASTER DET3 + mapsensors 400kpa (4bar) 

Intercooler 600x300x76 ,highflow, 76mm in/out, 700HP+ FLOW

Fuel Pump 044 250/h for 500HP flow 

Thermal tape for TURBOS T3

20 meters Titanium thermal tape for downpipe , exhaust system , manifolds !

Head Exhaust/Manifolds gaskets

Oil system Turbo-Engine Teflon PTFE 0,5m (return of oil)

Oil system turbo return flange + accesories

Oil system return (engine) + accesories

powerflex " stainless steel exhaust flexible pipe 76mm (3")

T3 gaskets Turbo

Full silikons for INTAKE SYSTEM : options (RED , BLUE  , BLACK)

* OPTIONS: Dual CLUTCH ! Full set! Ready for 900Nm+ !

VBANDS 2 x 3" 76mm stainless steel for exhaust system

Exhaust exhaust system 3" MUFLER (76mm) 

T-Clamps (7x) stainlessteel for intake system

stainlesssteel material for exhaust and intake system

stainlesssteel material for exhaust and intake system

EGT sensor + gauge

BOOST sensor + gauge

Oil tmp sensor + gauge

Big AIR FILTER 4" (102mm)   / or Turboguard 

FUll MAPs for ECU ! ready for boost.

Technical supports, online supports .

ATTENTION ! The set is ready to ship within 5-10 days.

After receiving the order, we start making the set (according to the customer's choice).

The set is sent in packages (3-7 packages) depending on the choice of accessories.

short installation video :) after purchase, we send a long video about the assembly process.

e30 m50:

det3 installations:

part1:

part2

part3

part4

part 5