12 mm thick through distances per side with centering flange.

The distances have been subjected to hard anodization and have been protected with nickel acetate, thanks to which we obtain a hard abrasive layer of black material with a thickness of 40 microns.

The price applies to the set for one axle with screws.

Product description:

material - duralumin PA6

distance thickness - 12mm per side ( 24mm per axle )

hole/flange diameter - 72.6mm

hole spacing - 5x120mm

screws included depending on the model of the car:

12 x 1.5 x 40 cone

14 x 1.5 x 40 cone

14 x 1.25 x 40 cone

bolt hardness 10.9

Distances match:

Series 1 - E82, E87, E88

Series 3 - E36, E46, E90, E91, E92, E93, F30

Series 4 - F32

Series 5 - E28, E34, E60, E61, F10

Series 6 - E35

Series 7 - E32, E38, E65, E66, F01

BMW X1

BMW X3 - E83

BMW X5 - E53

BMW Z3

BMW Z4

BMW Z8

Our distances are made of PA6 duralumin shaft, making them very durable and at the same time light

Both the opening and the centering flange are created in tolerances up to 0.05 mm, which ensures accurate wheel centering and prevents vibrations on the steering wheel that occur when the wheel is not well alignmentd.

Screw-on distances are also made of duraluminium with press-on radełkowa pins or threaded steel bushings, which prevents the threads from breaking. Both the pins and the bushings are protected against pulling them out when tightening the wheel through its two-stage shape.

The advantage of distances is to increase the wheelbase, so that the car behaves better when cornering, and also looks nicer, because the wheels are not t tipped in fenders.

Thanks to the use of distances, we can mount rims with other parameters such as larger weaning (ET), because we eliminate the difference precisely by distances. You can also use distances that change the spacing of the bolts, allowing you to attach wheels from another car with the same number of fixing screws.